| PART |
Description |
Maker |
| SA56606-XX SA56606-29GW SA56606-44GW SA56606-27 SA |
CMOS system reset CMOS系统复位
CMOS system reset 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5
CAP 0.01UF 50V 10% X7R SMD-0603 TR-7-PA NI-BAR/SN ROHS
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| CAT823 CAT823LSDI-G CAT823LTDI-G CAT823MSDI-G CAT8 |
1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5
System Supervisory Voltage Reset with Watchdog and Manual Reset
|
Catalyst Semiconductor
|
| TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶???????
IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC
The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
| MAX6332UR20D3-T MAX6333UR20D3-T MAX6334UR20D3-T MA |
Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.6V, reset timeout(min) 20ms.
3-Pin, Ultra-Low-Voltage, Low-Power P Reset Circuits
3-Pin, Ultra-Low-Voltage, Low-Power μP Reset Circuits
3-Pin Ultra-Low-Voltage Low-Power P Reset Circuits
From old datasheet system
3-Pin, Ultra-Low-Voltage, Low-Power レP Reset Circuits
3-Pin / Ultra-Low-Voltage / Low-Power P Reset Circuits
TV 79C 79#22D SKT RECP 3引脚，超低电压，低功耗レP复位电路
Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.6V, reset timeout(min) 1ms.
|
MAXIM - Dallas Semiconductor
http://
Maixm
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
Maxim Integrated Produc...
|
| MAX792 MAX792CPE MAX792CSE MAX792EJE MAX792EPE MAX |
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy -2%
Microprocessor Voltage Monitors with Programmable Voltage Detection
Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset 14-CFP -55 to 125 微处理器和非挥发性内存监控电
Microprocessor and Non-Volatile Memory Supervisory Circuits
From old datasheet system
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy -2%
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
|
| S24023SB |
Precision RESET Controller and 4K I2C Memory With Both RESET and RESET Outputs 精密复位控制器和4K的I2C既复位和复位输出记忆
|
Summit Microelectronics, Inc.
|
| PST90XX PST9013 |
IC for System Reset Monolithic IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PBCY3
From old datasheet system
|
MITSUMI ELECTRIC CO., LTD.
|
| 12LCT 63LET 355LMT 50LET 35LET 315LMT |
4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
Fuse 保险
|
TE Connectivity, Ltd.
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| SA56614-XX SA56614-XX_3 |
CMOS system reset
From old datasheet system
|
Philips
|
